Flexispot Standing Desk Review …Flexispot Logo…
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a couple of functions that I wasn’t always a huge fan of:
The plan that the desk was available in was heavy, so bringing it inside was a group effort, but this is simply a repercussion of how durable the Flexispot is.
The hassle-free cable television tray was a bit complicated to install. In the end, you eventually slip it under screws, which wasn’t really clear from the instructions.
You will require to purchase an anti-fatigue mat to stay comfy, however this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both thrilled (given that this implied it was going to be strong) and also a little hesitant (since all of us understand how much of a difficulty assembling furniture can be).
Thankfully, with the help of an educational YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t described well in the guidelines.
When put together, I enjoy the smooth look of this desk. I’m positive any of the many diverse finishes that it can be found in would look great in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of home offices.
The quiet operation and height memory settings make it easy, effective, and peaceful to change between sitting and standing as sometimes as you desire throughout the day.
Last but not least, this desk is durable. It can hold up to 335 pounds even while in operation, so if you have a hefty desktop computer (or want to sleep on it for some reason) it has you covered. It will also equally disperse weight no matter how out of balance the weight you place on it is, it won’t wobble or wiggle.
in that video is pretty kitted out as the desk we’re taking a look at today is pretty fundamental I attempted to get as near to that as I could on uplifts site with similar configurations the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift model is really five inches longer however you can do a lot with five inches boom yes now for openness flexi area did send this desk out for review but as you ought to know by now doesn’t impact my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering till completion of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can perhaps get doing not have even any cable television grommets for pass through the outside carton
for the desktop was not harmed in any way which is entirely strange because I could shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted just very rough man if I had actually bought this I ‘d have been on the phone with client service immediately they did also managed to miss drilling the pilot holes where you can attach the control box to the desktop a great deal of having to do that myself without mistakenly drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact pretty uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each component to support motorized function oddly definitely where any type of cable television management products whatsoever the frame on this system is a single motor double stage style versus the double motor three-stage design that comes requirement with the uplift desk this can be updated too to both the dual stage dual motor and a three-stage dual motor which pushes the expense of the desk up
an extra 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from just under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than high adequate even for me and I remain at 6 foot for this design does come standard with the control board that allows for up-and-down motion plus three memory areas with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which needs to be changed as the width of the desk is changed the motor operation itself while it might be sluggish is very peaceful as in barely audible this outside a price would be the one benefit I would give this system over the uplift desk and I wish to beware here due to the fact that this isn’t a hit piece this desk is 240 dollars less expensive than the comparable uplift design over 35% less expensive even if you upgrade this flexi spot test to the double motor three-stage style it still comes in a hundred and seventy dollars less expensive than the uplift however cheaper doesn’t suggest inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll definitely provide it that however the lateral stability of this desk the horizontal movement at this cost point it’s unacceptable it’s add insult to injury here they include a little security baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft hits the noise and this baffle is definitely shocking to top things off I decided to include rolling casters to this desk this was a $30 upgrade and 2 of those four casters arrived harmed too my prepare for this desk at this moment is to lose the desk top and featured entirely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops up to 63 inches broad and 31 and a half inches deep so this will roll around the studio make it simpler to movie products without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality office furniture that will last you this at finest seems like a less expensive imitation of that it just doesn’t feel quality and the distinction between this desk and my main desk is night and day do do not hesitate to have a look at their site also which likewise feels eerily comparable to one of their rivals there’s a wealth of accessories you can get for the flexi area desk as much as and including a foot massager and even a stationary exercise bike and I might spend another 10 minutes of our valuable time covering various options and accessories I could but I think I’m better that they only sent out a fundamental desk because as a standard desk I’m not a fan of the quality assurance at this price point and I don’t think slapping on a lot of extras is the move when the core product isn’t what it must be they do offer a 30-day trial if you’re simply morbidly curious and they service warranty their desks for three years really desk is 5 years and uplift desk is seven years if you are Flexispot Logo
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in regards to gaming and productivity however I would spend the money it’s gon na take to enter into a higher end producer like uplift desk or really desk and I have not personally used very desk products so I can’t speak on it but their credibility is great huge thanks to flexi spot for sending this out for evaluation sadly I can not recommend this system and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a problem with viewing as how both the desktop and the casters showed up damaged however from a customer viewpoint you ‘d probably be actually excited to get this in