Flexispot Kana Bamboo Standing Desk – 77% OFF Today Only

Flexispot Standing Desk Evaluation …Flexispot Kana Bamboo Standing Desk…

Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a few functions that I wasn’t always a substantial fan of:

The package that the desk can be found in was heavy, so bringing it inside was a group effort, however this is just a consequence of how strong the Flexispot is.
The hassle-free cable television tray was a bit confusing to install. In the end, you ultimately slip it under screws, which wasn’t very clear from the guidelines.
You will need to buy an anti-fatigue mat to remain comfy, however this is a great concept for any standing desks, so I can’t fault Flexispot for that.

When it got here and I saw how heavy it was, I was both excited (given that this suggested it was going to be durable) and also a little hesitant (since we all understand just how much of a difficulty assembling furnishings can be).

Thankfully, with the help of an educational YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only problem I have with assembly was the cable television tray, which I found wasn’t explained well in the directions.

When assembled, I like the sleek appearance of this desk. I’m positive any of the many diverse finishes that it is available in would look terrific in any office, and the adjustable width makes it easy to fit it in even the tiniest of home offices.

The quiet operation and height memory settings make it simple, efficient, and quiet to change between sitting and standing as often times as you want throughout the day.

Lastly, this desk is durable. It can hold up to 335 pounds even while in operation, so if you have a significant desktop (or want to take a nap on it for some reason) it has you covered. It will likewise equally disperse weight no matter how unbalanced the weight you put on it is, it will not wiggle or wobble.

 

because video is pretty kitted out as the desk we’re taking a look at today is quite basic I tried to get as near to that as I could on uplifts site with comparable setups the flexi area desk we’re taking a look at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift model is really 5 inches longer however you can do a lot with 5 inches boom yes now for openness flexi area did send this desk out for evaluation but as you must understand by now doesn’t impact my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering until completion of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can perhaps get doing not have even any cable grommets for go through the outdoors carton

for the desktop was not harmed in any way which is utterly unusual since I might shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted simply incredibly rough man if I had actually acquired this I ‘d have been on the phone with customer service immediately they did also managed to miss drilling the pilot holes where you can attach the control box to the desktop a lot of needing to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really quite uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cables going to it from each component to support motorized function unusually absolutely where any sort of cable management materials whatsoever the frame on this system is a single motor dual phase design versus the dual motor three-stage design that comes requirement with the uplift desk this can be updated as well to both the double phase double motor and a three-stage dual motor which pushes the expense of the desk up

an additional 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from simply under 28 inches to simply over forty seven point 6 inches so a max I ‘d it is more than high sufficient even for me and I remain at 6 foot for this design does come basic with the control panel that allows for up-and-down motion plus three memory spots with an LED readout to tell you the desk height the single motor design utilizes this drive shaft assembly which has to be changed as the width of the desk is changed the motor operation itself while it might be sluggish is very quiet as in barely audible this outside a price would be the one benefit I would provide this unit over the uplift desk and I want to beware here due to the fact that this isn’t a hit piece this desk is 240 dollars cheaper than the comparable uplift design over 35% cheaper even if you update this flexi spot test to the dual motor three-stage style it still is available in a hundred and seventy dollars cheaper than the uplift however cheaper does not imply low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll definitely give it that however the lateral stability of this desk the horizontal motion at this rate point it’s inappropriate it’s rub salt in the wound here they consist of a little safety baffle this little steel piece that installs to the frame and covers a portion of this rotating driveshaft when

this desk sees any lateral movement at all the drive shaft strikes the sound and this baffle is absolutely frustrating to top things off I decided to include rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters arrived harmed as well my plan for this desk at this point is to lose the desk top and featured all together and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches wide and 31 and a half inches deep so this will roll around the studio make it much easier to movie products without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality office furniture that will last you this at best seems like a cheaper replica of that it just does not feel quality and the distinction between this desk and my main desk is night and day do feel free to check out their site also which also feels eerily comparable to among their competitors there’s a wealth of accessories you can get for the flexi spot desk as much as and consisting of a foot massager and even a stationary stationary bicycle and I could spend another 10 minutes of our valuable time covering various options and devices I could however I believe I’m better that they just sent out a fundamental desk due to the fact that as a standard desk I’m not a fan of the quality control at this cost point and I do not believe slapping on a bunch of additionals is the move when the core product isn’t what it should be they do provide a 30-day trial if you’re simply morbidly curious and they warranty their desks for three years really desk is 5 years and uplift desk is seven years if you are Flexispot Kana Bamboo Standing Desk

in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in regards to video gaming and efficiency however I would spend the extra money it’s gon na require to enter into a higher end maker like uplift desk or very desk and I haven’t personally used very desk products so I can’t speak on it but their reputation is excellent huge thanks to flexi spot for sending this out for evaluation regrettably I can not recommend this unit and for the record I’m a hundred percent sure they would have happily changed the parts that I had a problem with seeing as how both the desktop and the casters showed up harmed however from a consumer viewpoint you ‘d probably be really thrilled to get this in