Flexispot Gaming Desk – 77% OFF Today Only

Flexispot Standing Desk Evaluation …Flexispot Gaming Desk…

Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few features that I wasn’t always a substantial fan of:

The bundle that the desk can be found in was heavy, so bringing it inside was a group effort, but this is just a consequence of how strong the Flexispot is.
The convenient cable tray was a bit complicated to install. In the end, you eventually slip it under screws, which wasn’t extremely clear from the instructions.
You will require to purchase an anti-fatigue mat to remain comfy, however this is a good concept for any standing desks, so I can’t fault Flexispot for that.

When it got here and I saw how heavy it was, I was both ecstatic (considering that this meant it was going to be sturdy) and likewise a little hesitant (due to the fact that all of us know how much of an obstacle assembling furnishings can be).

The good news is, with the help of an educational YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t explained well in the guidelines.

When put together, I love the smooth appearance of this desk. I’m confident any of the many diverse finishes that it is available in would look great in any office, and the adjustable width makes it easy to fit it in even the tiniest of office.

The peaceful operation and height memory settings make it easy, efficient, and peaceful to change in between sitting and standing as lot of times as you want throughout the day.

Lastly, this desk is durable. It can hold up to 335 lbs even while in operation, so if you have a significant desktop computer (or want to sleep on it for some reason) it has you covered. It will also equally distribute weight no matter how unbalanced the weight you place on it is, it will not wiggle or wobble.

 

because video is pretty kitted out as the desk we’re looking at today is quite standard I tried to get as near that as I might on uplifts site with comparable setups the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift design is really 5 inches longer but you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for evaluation but as you must understand by now does not impact my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering up until completion of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can possibly get lacking even any cable television grommets for go through the outside carton

for the desktop was not damaged in any way which is entirely bizarre because I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted just extremely rough male if I had actually purchased this I ‘d have been on the phone with customer service immediately they did also handled to miss out on drilling the pilot holes where you can attach the control box to the desktop a lot of needing to do that myself without mistakenly drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually pretty simple the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each part to support motorized function unusually absolutely where any sort of cable management products whatsoever the frame on this unit is a single motor dual phase style versus the double motor three-stage style that comes standard with the uplift desk this can be updated too to both the double phase dual motor and a three-stage double motor which pushes the expense of the desk up

an additional 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from just under 28 inches to just over forty seven point six inches so a max I ‘d it is more than high sufficient even for me and I remain at 6 foot for this design does come basic with the control panel that enables up-and-down motion plus three memory spots with an LED readout to tell you the desk height the single motor style uses this drive shaft assembly which has to be adjusted as the width of the desk is adjusted the motor operation itself while it might be slow is really quiet as in barely audible this outside a cost would be the one benefit I would provide this system over the uplift desk and I want to take care here since this isn’t a hit piece this desk is 240 dollars cheaper than the equivalent uplift design over 35% more affordable even if you upgrade this flexi spot test to the dual motor three-stage style it still comes in a hundred and seventy dollars cheaper than the uplift but less expensive does not indicate inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll definitely give it that however the lateral stability of this desk the horizontal movement at this cost point it’s inappropriate it’s add fuel to the fire here they consist of a little security baffle this little steel piece that installs to the frame and covers a part of this turning driveshaft when

this desk sees any lateral motion at all the drive shaft strikes this baffle and the noise is definitely shocking to leading things off I decided to add rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters showed up damaged also my plan for this desk at this moment is to lose the desk top and came with completely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable image table which you can’t do this frame will accommodate desktops approximately 63 inches wide and 31 and a half inches deep so this will roll around the studio make it much easier to film items without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is an investment in quality office furniture that will last you this at best seems like a cheaper replica of that it just doesn’t feel quality and the difference between this desk and my main desk is night and day do do not hesitate to take a look at their site as well which likewise feels eerily comparable to among their competitors there’s a wealth of devices you can get for the flexi spot desk approximately and consisting of a foot massager and even a fixed exercise bike and I could invest another 10 minutes of our valuable time covering various choices and devices I could but I believe I’m happier that they just sent out a basic desk because as a fundamental desk I’m not a fan of the quality assurance at this cost point and I don’t believe slapping on a lot of additionals is the relocation when the core item isn’t what it must be they do offer a 30-day trial if you’re simply morbidly curious and they service warranty their desks for 3 years extremely desk is 5 years and uplift desk is seven years if you are Flexispot Gaming Desk

in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in regards to video gaming and productivity however I would invest the additional money it’s gon na require to enter a greater end manufacturer like uplift desk or extremely desk and I haven’t personally used really desk items so I can’t speak on it however their credibility is excellent huge thanks to flexi area for sending this out for evaluation regrettably I can not recommend this system and for the record I’m a hundred percent sure they would have happily replaced the parts that I had an issue with seeing as how both the desktop and the casters showed up harmed however from a customer viewpoint you ‘d most likely be actually excited to get this in