Flexispot E8 Standing Desk Ireland – 77% OFF Today Only

Flexispot Standing Desk Review …Flexispot E8 Standing Desk Ireland…

Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a couple of features that I wasn’t necessarily a big fan of:

The bundle that the desk came in was heavy, so bringing it inside was a group effort, however this is just an effect of how strong the Flexispot is.
The convenient cable tray was a little bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t extremely clear from the instructions.
You will need to buy an anti-fatigue mat to stay comfy, however this is a good concept for any standing desks, so I can’t fault Flexispot for that.

When it showed up and I saw how heavy it was, I was both ecstatic (considering that this meant it was going to be tough) and also a little reluctant (since all of us understand just how much of a difficulty putting together furniture can be).

Luckily, with the help of an educational YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only problem I have with assembly was the cable television tray, which I found wasn’t described well in the instructions.

As soon as put together, I love the streamlined look of this desk. I’m confident any of the many diverse finishes that it comes in would look terrific in any workplace, and the adjustable width makes it easy to fit it in even the smallest of home offices.

The quiet operation and height memory settings make it simple, efficient, and peaceful to change in between sitting and standing as often times as you want throughout the day.

This desk is durable. It can hold up to 335 lbs even while in operation, so if you have a large desktop computer (or wish to take a nap on it for some reason) it has you covered. It will likewise evenly disperse weight no matter how unbalanced the weight you put on it is, it won’t wiggle or wobble.

 

in that video is quite kitted out as the desk we’re taking a look at today is pretty basic I tried to get as close to that as I could on uplifts site with equivalent configurations the flexi spot desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift design is in fact five inches longer but you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for review but as you ought to know by now does not affect my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering until the end of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can potentially get doing not have even any cable television grommets for go through the outside container

for the desktop was not damaged in any way which is entirely bizarre since I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted just super rough male if I had bought this I ‘d have been on the phone with client service right away they did also managed to miss drilling the pilot holes where you can attach the control box to the desktop a lot of having to do that myself without mistakenly drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was in fact pretty simple the entire thing came together in about 45 minutes and despite the fact that there’s cables running to it from each part to support motorized function strangely absolutely where any kind of cable management products whatsoever the frame on this unit is a single motor dual stage style versus the dual motor three-stage style that comes standard with the uplift desk this can be upgraded as well to both the dual stage dual motor and a three-stage double motor which presses the expense of the desk up

an extra 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from just under 28 inches to just over forty seven point six inches so a max I ‘d it is more than high enough even for me and I stay at 6 foot for this model does come standard with the control board that allows for up-and-down movement plus 3 memory areas with an LED readout to inform you the desk height the single motor design utilizes this drive shaft assembly which needs to be adjusted as the width of the desk is adjusted the motor operation itself while it might be sluggish is very quiet as in barely audible this outside a price would be the one advantage I would offer this system over the uplift desk and I wish to take care here due to the fact that this isn’t a hit piece this desk is 240 dollars less expensive than the similar uplift design over 35% more affordable even if you upgrade this flexi spot test to the double motor three-stage style it still can be found in a hundred and seventy dollars less expensive than the uplift however cheaper doesn’t mean inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll absolutely provide it that but the lateral stability of this desk the horizontal movement at this price point it’s inappropriate it’s add fuel to the fire here they consist of a little security baffle this little steel piece that mounts to the frame and covers a portion of this rotating driveshaft when

this desk sees any lateral motion at all the drive shaft hits the sound and this baffle is definitely infuriating to top things off I chose to include rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters arrived damaged also my plan for this desk at this point is to lose the desk top and came with completely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops approximately 63 inches broad and 31 and a half inches deep so this will roll around the studio make it easier to film products without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is an investment in quality office furniture that will last you this at finest seems like a cheaper imitation of that it simply doesn’t feel quality and the distinction between this desk and my primary desk is night and day do feel free to have a look at their site also which also feels eerily similar to among their rivals there’s a wealth of accessories you can get for the flexi spot desk approximately and including a foot massager and even a fixed exercise bike and I could invest another 10 minutes of our valuable time covering different alternatives and devices I could however I think I’m happier that they just sent out a fundamental desk since as a basic desk I’m not a fan of the quality assurance at this cost point and I don’t believe slapping on a bunch of bonus is the move when the core product isn’t what it must be they do offer a 30-day trial if you’re simply morbidly curious and they guarantee their desks for 3 years very desk is five years and uplift desk is 7 years if you are Flexispot E8 Standing Desk Ireland

in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of video gaming and productivity but I would invest the money it’s gon na take to enter into a greater end producer like uplift desk or very desk and I haven’t personally used really desk items so I can’t speak on it but their reputation is excellent huge thanks to flexi area for sending this out for evaluation unfortunately I can not suggest this system and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a concern with seeing as how both the desktop and the casters arrived harmed but from a customer perspective you ‘d probably be really thrilled to get this in