Flexispot Desk Program – 77% OFF Today Only

Flexispot Standing Desk Evaluation …Flexispot Desk Program…

Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a couple of features that I wasn’t always a big fan of:

The package that the desk can be found in was heavy, so bringing it inside was a group effort, however this is simply a consequence of how strong the Flexispot is.
The hassle-free cable television tray was a little bit confusing to set up. In the end, you eventually slip it under screws, which wasn’t really clear from the directions.
You will require to purchase an anti-fatigue mat to remain comfortable, however this is a great concept for any standing desks, so I can’t fault Flexispot for that.

When it got here and I saw how heavy it was, I was both excited (given that this implied it was going to be strong) and also a little reluctant (since all of us understand just how much of a challenge putting together furniture can be).

Thankfully, with the help of a training YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I discovered wasn’t discussed well in the guidelines.

When assembled, I love the streamlined appearance of this desk. I’m positive any of the many varied finishes that it comes in would look fantastic in any office, and the adjustable width makes it simple to fit it in even the tiniest of home offices.

The peaceful operation and height memory settings make it simple, effective, and peaceful to switch between sitting and standing as sometimes as you want throughout the day.

This desk is durable. It can hold up to 335 lbs even while in operation, so if you have a substantial desktop (or want to take a nap on it for some reason) it has you covered. It will likewise uniformly distribute weight no matter how out of balance the weight you place on it is, it will not wobble or wiggle.

 

in that video is pretty kitted out as the desk we’re looking at today is quite basic I attempted to get as near to that as I might on uplifts website with similar setups the flexi spot desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift design is actually five inches longer however you can do a lot with 5 inches boom yes now for openness flexi spot did send this desk out for review however as you should know by now doesn’t impact my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping until the end of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can perhaps get lacking even any cable television grommets for go through the outdoors container

for the desktop was not damaged in any way which is utterly unusual because I might shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted just incredibly rough male if I had bought this I ‘d have been on the phone with customer care right away they did also handled to miss out on drilling the pilot holes where you can attach the control box to the desktop a great deal of having to do that myself without accidentally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really quite uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each component to support motorized function strangely absolutely where any kind of cable television management products whatsoever the frame on this system is a single motor double phase style versus the double motor three-stage design that comes standard with the uplift desk this can be updated also to both the double phase dual motor and a three-stage dual motor which pushes the cost of the desk up

an additional 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from just under 28 inches to simply over forty 7 point six inches so a max I ‘d it is more than tall sufficient even for me and I remain at 6 foot for this model does come standard with the control panel that enables up-and-down movement plus 3 memory spots with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which needs to be adjusted as the width of the desk is adjusted the motor operation itself while it might be slow is really quiet as in barely audible this outside a price would be the one benefit I would offer this system over the uplift desk and I wish to beware here since this isn’t a hit piece this desk is 240 dollars less expensive than the comparable uplift design over 35% less expensive even if you update this flexi spot test to the double motor three-stage style it still can be found in a hundred and seventy dollars less expensive than the uplift however less expensive does not imply cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll definitely give it that however the lateral stability of this desk the horizontal movement at this cost point it’s inappropriate it’s rub salt in the wound here they consist of a little safety baffle this little steel piece that mounts to the frame and covers a portion of this rotating driveshaft when

this desk sees any lateral motion at all the drive shaft hits this baffle and the noise is definitely frustrating to top things off I chose to add rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters got here damaged as well my prepare for this desk at this moment is to lose the desk top and came with completely and change it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops approximately 63 inches wide and 31 and a half inches deep so this will roll around the studio make it much easier to film products without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality workplace furniture that will last you this at finest seems like a less expensive imitation of that it simply doesn’t feel quality and the difference in between this desk and my primary desk is night and day do do not hesitate to have a look at their site as well which also feels strangely similar to among their competitors there’s a wealth of accessories you can get for the flexi area desk approximately and consisting of a foot massager and even a stationary stationary bicycle and I could invest another 10 minutes of our precious time covering numerous options and accessories I might but I think I’m happier that they only sent out a standard desk because as a fundamental desk I’m not a fan of the quality control at this rate point and I do not think slapping on a bunch of bonus is the move when the core product isn’t what it need to be they do provide a 30-day trial if you’re simply morbidly curious and they warranty their desks for 3 years really desk is 5 years and uplift desk is 7 years if you are Flexispot Desk Program

in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in regards to video gaming and efficiency however I would invest the money it’s gon na take to get into a greater end manufacturer like uplift desk or really desk and I haven’t personally utilized extremely desk items so I can’t speak on it however their track record is very good big thanks to flexi spot for sending this out for review sadly I can not recommend this unit and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a concern with viewing as how both the desktop and the casters arrived damaged however from a customer perspective you ‘d most likely be actually thrilled to get this in