Flexispot Standing Desk Review …Flexispot Desk Price…
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few features that I wasn’t always a big fan of:
The bundle that the desk came in was heavy, so bringing it inside was a group effort, but this is simply a consequence of how durable the Flexispot is.
The convenient cable television tray was a bit complicated to set up. In the end, you ultimately slip it under screws, which wasn’t really clear from the directions.
You will require to buy an anti-fatigue mat to stay comfortable, but this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both ecstatic (since this indicated it was going to be sturdy) and likewise a little reluctant (because all of us understand just how much of a challenge assembling furnishings can be).
Luckily, with the help of a training YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t explained well in the guidelines.
When put together, I love the streamlined appearance of this desk. I’m positive any of the many varied finishes that it can be found in would look great in any office, and the adjustable width makes it easy to fit it in even the smallest of office.
The quiet operation and height memory settings make it simple, effective, and quiet to switch in between sitting and standing as many times as you desire throughout the day.
Finally, this desk is durable. It can hold up to 335 pounds even while in operation, so if you have a substantial home computer (or want to take a nap on it for some reason) it has you covered. It will also evenly distribute weight no matter how out of balance the weight you place on it is, it won’t wobble or wiggle.
because video is quite kitted out as the desk we’re looking at today is pretty basic I tried to get as close to that as I could on uplifts website with comparable configurations the flexi area desk we’re taking a look at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift model is actually 5 inches longer but you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for evaluation but as you ought to understand by now does not impact my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping until completion of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can potentially get doing not have even any cable television grommets for go through the outdoors carton
for the desktop was not harmed in any way which is entirely strange since I might shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted just incredibly rough guy if I had actually purchased this I ‘d have been on the phone with customer service instantly they did likewise handled to miss drilling the pilot holes where you can connect the control box to the desktop a great deal of having to do that myself without accidentally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually pretty uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each part to support motorized function unusually absolutely where any kind of cable management products whatsoever the frame on this system is a single motor dual phase design versus the double motor three-stage style that comes standard with the uplift desk this can be upgraded also to both the double phase dual motor and a three-stage double motor which pushes the expense of the desk up
an additional 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from just under 28 inches to simply over forty 7 point six inches so a max I ‘d it is more than tall adequate even for me and I stay at 6 foot for this design does come standard with the control panel that allows for up-and-down motion plus 3 memory areas with an LED readout to inform you the desk height the single motor style utilizes this drive shaft assembly which has to be changed as the width of the desk is changed the motor operation itself while it might be slow is extremely peaceful as in barely audible this outside a rate would be the one advantage I would offer this unit over the uplift desk and I want to beware here because this isn’t a hit piece this desk is 240 dollars less expensive than the similar uplift model over 35% less expensive even if you update this flexi area test to the double motor three-stage design it still can be found in a hundred and seventy dollars more affordable than the uplift but cheaper doesn’t suggest inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll definitely give it that but the lateral stability of this desk the horizontal movement at this price point it’s inappropriate it’s rub salt in the wound here they include a little safety baffle this little steel piece that installs to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft strikes this baffle and the sound is absolutely shocking to top things off I decided to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters got here damaged too my plan for this desk at this moment is to lose the desk top and included entirely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops up to 63 inches broad and 31 and a half inches deep so this will roll around the studio make it much easier to film products without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is an investment in quality office furniture that will last you this at best seems like a cheaper replica of that it just doesn’t feel quality and the distinction between this desk and my main desk is night and day do feel free to have a look at their site also which also feels eerily similar to among their rivals there’s a wealth of accessories you can get for the flexi spot desk up to and including a foot massager and even a fixed exercise bike and I might spend another 10 minutes of our valuable time covering numerous options and accessories I could but I think I’m better that they just sent out a standard desk due to the fact that as a standard desk I’m not a fan of the quality control at this price point and I do not believe slapping on a bunch of extras is the move when the core product isn’t what it must be they do provide a 30-day trial if you’re just morbidly curious and they warranty their desks for 3 years very desk is five years and uplift desk is 7 years if you are Flexispot Desk Price
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in regards to gaming and productivity however I would spend the money it’s gon na take to enter a greater end producer like uplift desk or really desk and I haven’t personally utilized very desk products so I can’t speak on it but their track record is very good big thanks to flexi area for sending this out for review regrettably I can not advise this system and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a concern with viewing as how both the desktop and the casters arrived damaged however from a client standpoint you ‘d probably be really excited to get this in