Compare Flexispot Desks – 77% OFF Today Only

Flexispot Standing Desk Evaluation …Compare Flexispot Desks…

Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a few features that I wasn’t necessarily a big fan of:

The package that the desk came in was heavy, so bringing it inside was a group effort, but this is simply an effect of how durable the Flexispot is.
The hassle-free cable tray was a bit complicated to install. In the end, you eventually slip it under screws, which wasn’t extremely clear from the directions.
You will require to purchase an anti-fatigue mat to remain comfortable, however this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.

When it showed up and I saw how heavy it was, I was both excited (since this indicated it was going to be sturdy) and likewise a little reluctant (because all of us know how much of an obstacle putting together furniture can be).

Luckily, with the help of a training YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I discovered wasn’t explained well in the directions.

When assembled, I enjoy the sleek look of this desk. I’m confident any of the many diverse finishes that it can be found in would look fantastic in any office, and the adjustable width makes it simple to fit it in even the tiniest of office.

The peaceful operation and height memory settings make it simple, efficient, and peaceful to switch in between sitting and standing as lot of times as you want throughout the day.

Lastly, this desk is strong. It can hold up to 335 pounds even while in operation, so if you have a hefty desktop computer (or wish to sleep on it for some reason) it has you covered. It will also uniformly disperse weight no matter how out of balance the weight you place on it is, it won’t wobble or wiggle.

 

in that video is pretty kitted out as the desk we’re looking at today is pretty standard I attempted to get as close to that as I might on uplifts site with comparable configurations the flexi spot desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift design is in fact 5 inches longer but you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for evaluation however as you must understand by now does not impact my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering up until completion of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can possibly get doing not have even any cable grommets for travel through the outdoors container

for the desktop was not damaged in any way which is entirely unusual due to the fact that I could shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted just extremely rough male if I had bought this I ‘d have been on the phone with customer care immediately they did likewise managed to miss drilling the pilot holes where you can connect the control box to the desktop a lot of needing to do that myself without unintentionally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact quite straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cables running to it from each element to support motorized function strangely definitely where any type of cable television management products whatsoever the frame on this unit is a single motor dual phase design versus the dual motor three-stage style that comes requirement with the uplift desk this can be upgraded also to both the dual phase double motor and a three-stage dual motor which presses the expense of the desk up

an additional 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from just under 28 inches to just over forty seven point 6 inches so a max I ‘d it is more than high sufficient even for me and I stay at 6 foot for this model does come standard with the control panel that enables up-and-down movement plus three memory areas with an LED readout to tell you the desk height the single motor style uses this drive shaft assembly which needs to be changed as the width of the desk is changed the motor operation itself while it might be slow is really peaceful as in barely audible this outside a rate would be the one advantage I would provide this system over the uplift desk and I wish to be careful here since this isn’t a hit piece this desk is 240 dollars less expensive than the equivalent uplift model over 35% less expensive even if you upgrade this flexi spot test to the double motor three-stage style it still comes in a hundred and seventy dollars less expensive than the uplift but more affordable doesn’t mean low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll definitely provide it that however the lateral stability of this desk the horizontal motion at this cost point it’s inappropriate it’s add insult to injury here they consist of a little safety baffle this little steel piece that installs to the frame and covers a portion of this rotating driveshaft when

this desk sees any lateral motion at all the drive shaft strikes this baffle and the sound is absolutely shocking to top things off I chose to include rolling casters to this desk this was a $30 upgrade and two of those 4 casters arrived harmed also my prepare for this desk at this point is to lose the desk top and came with entirely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops up to 63 inches large and 31 and a half inches deep so this will roll around the studio make it much easier to film products without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is an investment in quality office furniture that will last you this at finest feels like a less expensive replica of that it simply doesn’t feel quality and the difference between this desk and my primary desk is night and day do do not hesitate to have a look at their website also which likewise feels eerily similar to among their competitors there’s a wealth of devices you can get for the flexi area desk as much as and including a foot massager and even a fixed exercise bike and I might invest another 10 minutes of our valuable time covering different options and accessories I could however I think I’m better that they only sent out a basic desk since as a basic desk I’m not a fan of the quality control at this price point and I do not think slapping on a bunch of additionals is the relocation when the core item isn’t what it need to be they do use a 30-day trial if you’re simply morbidly curious and they warranty their desks for three years very desk is 5 years and uplift desk is seven years if you are Compare Flexispot Desks

in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in terms of gaming and efficiency but I would invest the money it’s gon na take to get into a greater end manufacturer like uplift desk or very desk and I haven’t personally used extremely desk products so I can’t speak on it however their track record is great big thanks to flexi spot for sending this out for evaluation unfortunately I can not advise this unit and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a problem with viewing as how both the desktop and the casters arrived damaged however from a customer perspective you ‘d probably be really thrilled to get this in